Frequently Asked Questions

Modification of the products and replacement of the original parts may cause violation of safety and laws. We therefore recommend that no changes are made to motorcycles that are incompatible with legal regulations.
We recommend 15w40 for scooter models and 10w40 for our speed models.
Each tire has its own tire pressure values.
Antifiriz protects metal and its alloys against rusting / abrasion in general, as well as antifreeze in winter and anti-heat in summer. Therefore, it is suitable to use in summer and winter. When Turkey based on the climate conditions recommended by mixing 50% to 33% antfiriz the water.
Periodic maintenance of your motorcycle; the first 500-1,000 km, 2,000 km and every 2,000 km after you are required to do. The periodic table for maintenance is given in the "User's Manual", "Warranty Maintenance" page.
We have no factory sales. You have to contact with our authorized dealers in sales and price issues.
Spare Parts Sales for ordering and ordering of spare parts. Our dealers should contact with our services.

Frequently Asked Questions

There is no content in the menu you want to reach ...

Useful Information

What should be taken care of in non-aqueous acler care? 1-Polar heads are clean and tight   2-Charge of   What should be taken care of when watery acupressure is maintained?   1-Level control of pure water chambers should be done   2-Pure water should be added to chambers missing pure water   3-Acid bomb low acicular acids should be completed   Is there a lot of motor damage in the excess water in the battery?   Since the excess water that is put into the battery will overflow, it will cause acid damage to the chassis and paint parts of your motor. That means your engine is damaged.   What should we look out for when battery maintenance is taking place?   1-The contact is closed   2-To ensure that the cargo is definitely away from the fire of the spark   3-To work with gloves, protect our skin and clothes from battery water and steam   4-After battery maintenance, it must be checked that the tensioner or connection apparatus has been replaced in order to prevent it from shaking after the battery is replaced in the motorcycle.   5-Care must be taken to ensure that the plus and minus connections of the pole heads are made properly.
Every gear and chain has a lifetime. The chains that are not built can be deformed, even broken in hard usage, putting the life of the driver in danger, damaging the motorcycle. The chains are used in a smooth and flat manner.   What can we do to protect the chain of motors?   1-We have to lubricate our chain periodically with high quality chain spreyi after a certain km. We must do this lubrication more frequently in heavy weather.   2-Chains should be cleaned with special chain cleaning spray or special solutions with the help of oil paint brush at certain times.   3-The washed chain should be greased after it is thoroughly dry.   4-Each chain has an ideal strain gauge, which is usually indicated on the back of the motorcycle label or in the manual.   Excessive number of chains or extreme tension chains damage motor and gears.The effect of decoupling is best. It is best to change the chains as front and rear gears, as a set. It is best not to chain the chain but to rivet the machine.
If the chain lubrication motor is not on the stand, two people are required to squeeze the front brake on the side stand (if you do not see how it is done, you can damage yourself and your motor) by turning the tire on both sides of the chain, and it is absolutely necessary to apply it so that it does not come on the tire. ATTENTION!   After lubrication, do not move immediately, expect a little tightening of the oil.
Motorcycles should not be washed with machines generating high pressure water, if they are forced to be washed they should be protected against cooling radiator honeycombs, electronic equipments, electronic circuits and relays.   The muffler outlet must be plugged in order to prevent water from escaping into the muffler.   Never store water in hot motor and brake discs.   The waters on the new washed motor should be wiped off and dried.   Motorcycles that are used immediately after washing may cause slippage in sudden bends and corners due to the flow of water on them.   Periodically, the motor should be cleaned with protective varnish, and black plastic parts should not be polished.   Plastic parts should be cleaned with quality plastic cleaners sold on the market.   It is beneficial to wash it with clean sponge and cheap brand hair shampoos sold on the market.
We know that bad and neglected tires are missing driving pleasure. What's more, a maintenance-free tire can bring the driver to life with a vital danger. How can our motorcycle tires be protected? Can there be a change in the tires of motorcycles that are not used in the winter?   Yes, the pressure and structure of the tire, which usually remains on the concrete floor and in unfavorable weather conditions for weeks, will change.   What needs to be done to prevent the change?   Place the tires in place.   It is advisable to use front and rear frames on some motorcycles.   It is also useful to place plastic between the floor and tires on the wooden side.   What are the controls that must be made in front of the tires before the start of the season?   At the beginning of the season, every motorcycle tire should be checked to see if it has cracks, wear, excessive hardening, deformation and hidden scratches.   In case this happens, the tires must be replaced with new ones.
1-To ensure that the front and rear wheels are of the proper size as recommended by the motor manufacturer.   2-If only the front or rear will change tires to be on the same profile.   3-To ensure that the date of manufacture of the tire to be purchased is newly dated.   In non-tubular tires, your tire changes with the inner tubes   5-During the installation of the tire, make sure that the arrow on the tire is in the correct direction   6-We need to pay attention to the control of the bearings during the installation of the rim to the motor, to replace it if there is space and noise, and to lubricate the wheel spindle with grease.
Every motorcycle should be tightened with appropriate keys, loosened bolts and screws during tightening. It is recommended that frequent loosening bolts be tightened with special medications.
The level of brake hydraulics should be controlled, hydraulic oils should be replaced with brands and types recommended at certain times. Time ranges are specified in manual books. The wear levels of front and rear brake pads should also be observed. ATTENTION!   The brake discs and the drum are damaged if the worn and discontinued brake pads are not checked.   Occasionally, the brake pads must be cleaned with a liner cleaner sprayer.   Why does the oil level in the hydraulic reservoir fall?   The oil in the hydraulic reservoir drops for two reasons.   1-Due to leaks and leaks in the brake system   2-Due to excessive wear of brake pads   After changing the brake pin, the level of the hydraulic oil reservoir will be replaced.   Attention!   It is necessary to wash the parts and hands with plenty of water after completing, so as not to contaminate the painted parts while hydraulic oil reinforcement is being done.
Each engine has periodic oil change km and time. In unused motorcycles, the oil life is one year. Otherwise, the oil lubrication feature is lost. Every motorcycle manual should be changed and the recommended time should be changed by using the oil recommended by the manufacturer.   Are there other things we need to change when changing the oil?   It is beneficial that the oil filter changes every oil change. It is recommended to change the Carter plug seal in each oil change.   ATTENTION!   After the engine has been installed in the oil, the engine should not be started immediately. It is necessary to wait for the other one to be on the stop button, the oil lamp is now in sight, and the oil lamp to turn off with short starts.   The oil may cause wear in the engine due to lubrication in newly replaced engines, which will be completed later than normal time. The motor should be controlled at a flat position with the oil level at every exit on every long road and every molten run.   In some engines with full synthetic oil, oil reduction is normal in very low amounts at high speeds and revs.

Useful Information

There is no content in the menu you want to reach ...

CUSTOMER SERVICE POLICY

 Falcon has created a customer-focused system that adopts to offer feedback to consumers with the proposal of solution as soon as possible in order to maximize consumer satisfaction by evaluating all suggestions, complaints, requests and desires coming from consumers with the aim of providing quality products and services at all times. .

 
Our Basic Principles
 
Accessibility: Through various communication channels offered by our company, our customers can easily communicate complaints, information requests, suggestions or pleasures and access to our company.
Information Availability: Customers can request the information they request in the shortest time and the fastest.
Quick Feedback: Answering all of our clients' inquiries as soon as possible is one of our top priorities.
Solution Focused: We respond quickly and effectively to the needs of our customers.
Objectivity: All submitted applications are evaluated objectively and the objectivity criterion is considered in the solution process.
Confidentiality: The use of personal information obtained during the application of our customers is limited by the law and adheres to the principle of confidentiality.
Customer Focus: We are adopting a customer-focused approach to provide the best service to our customers and to meet customer expectations at the highest level.
Initiative Usage: Employees have the authority to take initiative decisions when necessary to meet customer needs as quickly as possible and to keep customer satisfaction at the highest level.
Customer Participation in the Process: Our customers are informed in the most effective way about the evaluation of their communications and the solution phases, and they are actively involved in the process.
Denetime Clearance: Evaluation, resolution steps, status codes and results of applications made by our clients are reported and monitored.
In-house Information: Activities related to customer relations are shared and monitored throughout the company.
Continuous Improvement: The suggestions and thoughts from our customers are carefully evaluated and used as a source for continuous improvement work.
Professional Approach: Our company responds to the demands of insurers with a professional and professional approach.

PRIVACY POLICY

 Falcon has created a customer-focused system that adopts to offer feedback to consumers with the proposal of solution as soon as possible in order to maximize consumer satisfaction by evaluating all suggestions, complaints, requests and desires coming from consumers with the aim of providing quality products and services at all times. .

 
Falcon. including your personal data, are of great importance to the confidentiality and protection of your data that you have shared with us. Our goal is to protect your privacy and ensure the security of your data. The personal data being processed by Falcon is best protected within the technical possibilities.
 
Falcon stores, processes, and shares personal data with third parties for purposes set forth in this Privacy Policy. Falcon will not save on your personal data for any purpose other than that provided herein that is not legally applicable. Your data will be protected by high security measures, and your credit card and payment information will in no case be kept outside the limits allowed by law.
Falcon reserves the right to make changes and updates to this Privacy Policy at any time without prior notice from users. You can find links to these changes and updates, or visit Falcon's www.falconmotosiklet.com.tr website.
WHICH SITES AND WHICH PURPOSES YOUR FALCON DATA YOUR DESTINATIONS PROCESS?
 
Data relating to existing and potential customers may be acquired, stored, stored, maintained, modified, reorganized or otherwise processed and shared with third parties, in whole or in part, automatically or not. Customer data may include existing and potential customers with specific or identifiable data and personalized personal data. All of these data are collectively referred to as customer data.
Falcon operates customer consent, including personal data and personalized personal data, with the consent of the relevant customer, with the approval of the Membership Agreement. In addition, where explicitly provided for in the law;
Where it is necessary to process personal data of the parties to the contract, provided that it is directly related to the establishment or performance of a contract;
Where it is compulsory for Falcon to fulfill its legal obligations;
Where personal data is publicized by the person concerned;
Where data processing is compulsory for the establishment, use or protection of a right, the customer data shall be treated as being limited to such legitimate purposes.
Falcon's purposes in processing customer data include: (1) selling goods or services; (2) performing delivery and installation services and providing collection of necessary payments; (3) performing after-sales maintenance and repair operations; (4) fulfilling legal obligations arising from various legislations and responding to consumer inquiries; (5) informing customers about new products and campaigns by maintaining advertising and marketing activities; (6) To determine the number of users visiting the site, type of user, frequency of visits, user behavior , The site from which the site arrives and the site visited after the Site, the geographical locations of the users, etc. (8) meeting management reporting needs; (9) ensuring that the Company's rights are used, including in matters relating to legal procedures or obtaining legal advice; (10) Carrying out the necessary activities if the whole or part of the Company, its operation or any part of the Company is sold; (11) Sharing the group company in which it is incorporated in line with management needs; (12) keeping the database of the shopping history after the end of the customer relationship or using it as evidence in case of a dispute.
Falcon can use Cookies to collect data to be processed for the above purposes. Technical contact files, called cookies, are small text files that a user of a website sends to a computer or mobile browser. Cookies can be blocked through the browser. The user's visit to the Site means that he or she approves the use of the cookie under the policy.
On the site, links to sites and content managed by third parties may be provided or provided access. 3. Any control or intervention authority of Falcon on the person content